Payment & Shipping Terms:
|Name:||Polyurethane Spray Machine||The Ratio Of Raw Material:||1:1|
|Viscosity Range Of Raw Material:||200-1000CPS(under Working Temperature)||Max Working Pressure:||20Mpa (200bar)|
|Max Fluid Temperature:||80°C (176°F)||Max Output:||9kg/min (19.8 Lb/min)|
|Heater Power:||3000W×2||Drive Model:||Pneumatic|
|Spray Gun Clean:||Self-clean By Air||Voltage (Optional):||380V/50HZ/60HZ/3-PH Or 220V/50HZ/60HZ/1-PH|
|Pneumatic Source:||0.5-0.8Mpa 1m³/min (73-116psi 35 Cu Ft)||Mainframe:||1 Set|
|P2 Spray Gun:||1 Piece||Transfer Pump:||2 Pieces|
|Heated Hose (Standard):||15m (50ft)||Max Hose Length (Optional):||90m (300ft)|
|Transfer Pump Hose:||2 Pcs||Air Pipe:||1 Set|
|Spare Parts And Tools:||1 Set||Package Size (L×W×H):||90×90×145cm (2.95×2.95×4.75ft)|
|Net Weight/Gross Weight:||130kg/195kg (286 Lb/430 Lb)|
Wholesale cheap best choice RX-A500 polyurethane spray machine
|The ratio of raw material||1:1|
|Viscosity range of raw material||200-1000CPS(under working temperature)|
|Max working pressure||20Mpa (200bar)|
|Max fluid temperature||80°C (176°F)|
|Max output||9kg/min (19.8 lb/min)|
|Drive model||Full pneumatic|
|Spray gun clean||Self-clean by air|
|Voltage (Optional)||1-ph 220V 50Hz or 3-ph 380V 50Hz|
|Pneumatic source||0.5-0.8Mpa 1m³/min (73-116psi 35 cu ft)|
|A500 mainframe||1 set|
|P2 spray gun||1 pc|
|Transfer pump||2 pcs|
|Heated hose (Standard)||15m (50ft)|
|Max hose length (Optional)||90m (300ft)|
|Transfer pump hose||2 pcs|
|Air pipe||1 set|
|Spare parts and tools||1 set|
|Package size (L×W×H)||90×90×145cm (2.95×2.95×4.75ft)|
|Net weight/Gross weight||130kg/195kg (286 lb/430 lb)|
1. The equipment has obtained CE certification, safe and environmental protection.
2. Having the proprietary property rights in design and production, several national patents have been applied and approved.
3. The perfect coaxial structure design of the horizontal booster pump reduces greatly the abrasion of the sealing. There is no pressure difference during operation and the commuting pressure fluctuation value is ideal and stable.
4. The lubricant inside the anti-solidifying lubricating cylinder circulates with high speed so that the leaked material and impurities could be brought away rapidly. The shaft for black material is always kept in the lubricant avoiding the crystallization.
5. The delicate coupling structure is easy for the dismounting of the booster pump during the maintenance. When necessary, the complete unilateral raw material pump can be replaced to change the proportion of the raw material.
6. The pneumatic commuting control assembly is simple in structure and reliable in operation, and enables the pump body operating normally during the lack of electricity.
7. The design and application of the reset function when shut down realizes the dual protection.
8. The dual filters of the equipment for both high and low pressure and the filter of the nozzle realize the triple filtration protection for the raw material and reduce the blocking.
9. The special armoured temperature sensor inside the heater can collect the temperature signal at any time, hence the overshooting value for heating is well controlled.